Show Qos Rcv-Queue Multicast - Dell 8 Command Reference Manual

show qos rcv-queue multicast

Displays the runtime state retrieved from the dataplane reflecting any multicast packet expansion
packet drops resulting from a queue crossing the maximum queue depth.
Synopsis show qos rcv-queue multicast {tengigabitethernet slot/port | all}
Operands interface
Defaults There are no default configurations for this command.
Command EXEC mode
Modes
Description Use this command to display the runtime state information retrieved from the interface reflecting
any multicast packet expansion packet drops resulting from a queue crossing the maximum queue
depth.
Usage For a stand-alone switch, all ASICs are considered as slot number zero (0).
Guidelines
Examples To display the queueing information:
See Also show qos rcv-queue interface
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Use this keyword to specify any of the following interfaces:
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
all Reports QoS multicast packet expansion receive queueing statistics for all
ASICs within the system.
switch#show qos rcv-queue multicast intengigabitethernet 0/2
Dropped Counts
Linecard/Portset
-----------------------------------------------------------------------------
0/0
show qos rcv-queue multicast
TC 0 TC 1
0 0
16
TC 2 TC 3
0 0
265