Show Running-Config - Dell 8 Command Reference Manual

show running-config

Displays the contents of the configuration file currently running on the system.
Synopsis show running-config [access-list |cee-map | interface | lldp | rmon | spanning-tree]
Operands access-list
cee-map
interface
lldp
rmon
spanning-tree
Defaults There are no default configurations for this command.
Command Privileged EXEC mode
Modes
Description Use this command to display the contents of the configuration file currently running on the system.
The show running-config command displays only the commands that were successfully executed.
Usage There are no usage guidelines for this command.
Guidelines
Examples To display the content of the current configuration file:
See Also show startup-config
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Displays the running configuration of the access-list.
Displays the QoS Converged Enhanced Ethernet (CEE) maps configuration.
Displays the interface configuration.
Displays the LLDP configuration.
Displays the Remote Monitoring Protocol (RMON) configuration.
Displays the switch configuration.
switch#show running-config
!
no protocol spanning-tree
!
interface Vlan 1
!
interface InTenGigabitEthernet 0/0
shutdown
!
interface InTenGigabitEthernet 0/1
shutdown
!
interface InTenGigabitEthernet 0/2
shutdown
!
interface InTenGigabitEthernet 0/3
shutdown
!
interface InTenGigabitEthernet 0/4
shutdown
!
show running-config
2
37