Dell 8 Command Reference Manual page 152

8
show mac-address-table
Command EXEC mode
Modes
Description Use this command to display a specific static or dynamic MAC address entry or all entries for a
specific interface, a specific VLAN, a specific linecard, or for all interfaces and all VLANs.
Usage There are no usage guidelines for this command.
Guidelines
Examples To display a specific MAC address in the table:
To display the aging time for a specific MAC address table:
To display a dynamic MAC address table:
See Also show mac address-table dynamic, show mac address-table static, show mac address-table
linecard, show mac address-table count
136
switch#show mac-address-table address 0011.2222.3333
VlanId Mac-address
100 0011.2222.3333
Total MAC addresses
switch#show mac-address-table aging-time
MAC Aging-time : 300 seconds
switch#show mac-address-table dynamic
VlanId Mac-address
100 0011.2222.5555 Dynamic
100 0011.2222.6666 Dynamic Inactive
Total MAC addresses
Type State
Static Inactive
: 1
Type State
Inactive
: 2
Dell Converged Enhanced Ethernet Command Reference
Ports
Te 0/1
Ports
Te 0/1
Te 0/1
53-1002115-01