Commands Listed Alphabetically; Activate Remote Replication Feature - Dell PowerVault MD3620f Command Line Interface Manual

Commands Listed Alphabetically

Following are the script commands listed alphabetically.

Activate Remote Replication Feature

NOTE:
This command valid only with Fibre Channel storage arrays.
This command creates the replication repository virtual disk and activates the
Remote Replication premium feature. When using this command, the
replication repository virtual disk can be defined in one of three ways:
• User-defined physical disks
• User-defined disk group
• User-defined number of physical disks
If you choose to define a number of physical disks, the RAID controller
module firmware chooses which physical disks to use for the replication
repository volume.
Syntax
User-Defined Physical Disks
activate storageArray feature=remoteReplication
repositoryRAIDLevel=(1 | 5 | 6)
repositoryPhysicalDisks=(enclosureID1,slotID1 ...
enclosureIDn,slotIDn)
repositoryDiskGroupUserLabel=[diskGroupName]
physicalDiskMediaType=(HDD | SSD | unknown |
allMedia)
physicalDiskType=(SAS)
[enclosureLossProtect=(TRUE | FALSE)]
User-Defined Disk Group
activate storageArray feature=remoteReplication
repositoryDiskGroup=diskGroupName
[freeCapacityArea=freeCapacityIndexNumber]
140
Script Commands