Configuration Script Example 2 - Dell PowerVault MD3620f Command Line Interface Manual

The set virtualDisk command parameters are shown on separate lines. You do
not need to use separate lines for each parameter. You can enter more than
one parameter with the set virtualDisk command by leaving a space between
the parameters.
By using separate lines, however, you can more clearly see what parameters
you are setting and the values to which you are setting the parameters.
Blocking the parameters in this manner makes it easier to edit the file or copy
specific parameter settings for use in another script file.

Configuration Script Example 2

This example creates a new virtual disk using the create virtualDisk
command with user-defined physical disks in the storage array.
Show "Create RAID 5 Virtual Disk 2 on existing
Disk Group 2";
//This command creates the disk group and the
initial virtual disk on that group.
//Note: For disk groups that use all available
capacity, the last virtual disk on the group is
created using all remaining capacity by omitting
the capacity=virtualDisk creation parameter
create virtualDisk raidLevel=5 userLabel="2"
physicalDisks=[0,1 0,6 1,7 1,3 2,3 2,6] owner=1
segmentSize=16 capacity=2GB;
show "Setting additional attributes for virtual
disk 7";
//Configuration settings that cannot be set during
virtual disk creation
set virtualDisk["7"] mediaScanEnabled=false;
set virtualDisk["7"] consistencyCheckEnabled=
false;
set virtualDisk["7"] modificationPriority=high;
316
Sample Script Files