Set Session
This command defines how you want the current script engine session to run.
Syntax
set session errorAction=(stop | continue)
password="storageArrayPassword"
performanceMonitorInterval=intervalValue
performanceMonitorIterations=iterationValue
Parameters
Parameter
errorAction
password
performanceMonitorInterval
performanceMonitorIterations The number of samples to capture. Enter
Description
How the session responds if an error is
encountered during processing. You can
choose to stop the session if an error is
encountered, or you can continue the
session after encountering an error. The
default value is stop. (This parameter
defines the action for execution errors,
not syntax errors. Some error conditions
might override the continue value.)
The password for the storage array.
Enclose the password in double
quotation marks (" ").
The frequency of gathering performance
data. Enter an integer value for the
polling interval, in seconds, for which you
want to capture data. The range of values
is 3 to 3600 seconds. The default value is
5 seconds.
an integer value. The range of values for
samples captured is 1 to 3600. The
default value is 5.
Script Commands
249