Set Host Channel - Dell PowerVault MD3620f Command Line Interface Manual

Set Host Channel

This command defines the loop ID for the host channel.
Syntax
set hostChannel [hostChannelNumber]
preferredID=portID
Parameters
Parameter
hostChannel
preferredID
234
Script Commands
Description
The identifier number of the host channel for
which you want to set the loop ID.
The host channel identifier number is
constructed by combining the controller number
and the host channel number. Enclose the host
channel identifier number in square brackets ([
]). Separate the controller number from the host
channel number with a comma.
For example, the identifier number for host
channel 2 on controller 0 would be [0,2].
The port identifier for the specified host port.
Port ID values are 0 to 127.