Dell PowerVault MD3620f Command Line Interface Manual page 180

Parameter
freeCapacityArea
warningThresholdPercent
repositoryPercentOfSource
repositoryUserLabel
repositoryFullPolicy
180
Script Commands
Description
The index number of the free space in an
existing disk group to use to create the
snapshot repository virtual disk. Free
capacity is defined as the free capacity
between existing virtual disks in a disk
group. For example, a disk group might
have the following areas: virtual disk 1,
free capacity, virtual disk 2, free capacity,
virtual disk 3, free capacity. To use the free
capacity following virtual disk 2, you specify:
freeCapacityArea=2
Use the show diskGroup command to
determine if free capacity area exists.
NOTE:
If you do not specify the
unconfigured or free space, the repository
virtual disk is placed in the same disk group
as the source virtual disk. If the disk group
where the source virtual disk resides does
not have enough space, this command fails.
The percentage of repository capacity at
which you receive a warning that the
repository is nearing full. Use integer
values. For example, a value of 70 means
70 percent. The default value is 50.
The size of the repository virtual disk as a
percentage of the source virtual disk. Use
integer values. For example, a value of 40
means 40 percent. The default value is 20.
The name to give to the repository virtual
disk. You must put quotation marks (" ")
around the repository virtual disk name.
Specifies how snapshot processing
continues if the repository is full. You can
choose to fail writes to the source virtual
disk (failSourceWrites) or fail the
snapshot virtual disk (failSnapShot). The
default value is failSnapShot.