Removing Copy Pairs; Interaction With Other Features - Dell PowerVault MD3620f Command Line Interface Manual

client>smcli 123.45.67.89 -c "stop virtualDiskCopy
target [\"Obi_1\"];"
The following example is the script file version of the command:
stop virtualDiskCopy target ["Obi_1"];

Removing Copy Pairs

The remove virtualDiskCopy command enables you to remove a virtual disk
copy pair from the storage array configuration. All virtual disk copy
information for the source virtual disk and target virtual disk is removed from
the storage array configuration. The data on the source virtual disk or target
virtual disk is not deleted. Removing a virtual disk copy from the storage array
configuration also removes the read-only attribute for the target virtual disk.
CAUTION:
virtual disk copy before you can remove the virtual disk copy pair from the storage
array configuration.
The following syntax is the general form of the command:
remove virtualDiskCopy target [targetName] [source
[sourceName]]
The following example shows a command to remove a virtual disk copy pair:
client>smcli 123.45.67.89 -c "remove
virtualDiskCopy target [\"Obi_1\"];"
The following example is the script file version of the command:
remove virtualDiskCopy target ["Obi_1"];

Interaction With Other Features

You can run the Virtual Disk Copy feature while running the following
features:
• Storage Partitioning
• Snapshot Virtual Disks
90
Using the Virtual Disk Copy Feature
If the virtual disk copy has a status of In Progress, you must stop the