Set Iscsi Target Properties - Dell PowerVault MD3620f Command Line Interface Manual

Set iSCSI Target Properties

This command defines properties for an iSCSI target.
Syntax
set iscsiTarget ["iscsiID"]
(authenticationMethod=(none | chap) |
chapSecret="securityKey" |
targetAlias="userLabel")
Parameters
Parameter
iSCSIID
authenticationMethod
chapSecret
targetAlias
NOTE:
Challenge Handshake Authentication Protocol (CHAP) is a protocol that
authenticates the peer of a connection. CHAP is based upon the peers sharing a
"secret." A secret is a security key that is similar to a password.
NOTE:
Use the
authentication.
NOTE:
The
make it easier to identify. You can use any combination of alphanumeric characters,
hyphens, and underscores for the
of 30 characters.
238
Script Commands
chapSecret
parameter only for initiators requiring mutual
targetAlias
is a descriptive name that you can give to the target to help
Description
The iSCSI target for which you want to
set properties. Enclose the name in
double quotation marks (" "). You must
also enclose the iscsiID in either square
brackets ([ ]) or angle brackets (< >).
The means of authenticating your iSCSI
session.
The password that you want to use to
authenticate a peer connection.
The name that you want to use for the
target.
targetAlias targetAlias
. The can have a maximum