Additional Information
A feature pack is a predefined set of premium features, such as Storage
Partitioning and Remote Replication. These premium features are combined
for the convenience of the users.
A premium feature is an additional application to enhance the capabilities of
a storage array.
NOTE:
Before you enable the High Performance Tier premium feature, stop all host
I/O operations to the storage array. When you enable the High Performance Tier
premium feature, both RAID controller modules in the storage array immediately
reboot.
Recopy Virtual Disk Copy
This command reinitiates a virtual disk copy operation by using an existing
virtual disk copy pair.
NOTE:
See "Preparing Host Servers to Recopy a Virtual Disk" on page 87.
CAUTION:
access (I/O) activity or suspend data transfer to the source virtual disk and (if
applicable, the target disk) to ensure that you capture an accurate point-in-time
image of the source virtual disk. Close all applications, including Windows
Internet Explorer, to make sure all I/O activity has stopped.
NOTE:
Removing the drive letter of the associated virtual disk(s) in Windows or
unmounting the vitual drive in Linux helps to guarantee a stable copy of the drive for
the virtual copy.
Syntax
recopy virtualDiskCopy target [targetName]
[source [sourceName]]
[copyPriority=(highest | high | medium | low |
lowest)
targetReadOnlyEnabled=(TRUE | FALSE)]
202
Script Commands
Before you create a new copy of a source virtual disk, stop any data