•
Date and time to which the RAID controller module is set
•
Associated virtual disks (including preferred owner)
•
Ethernet port
•
Physical disk interface
Syntax
show (allControllers | controller [(0 | 1)])
[summary]
Parameters
Parameter
allControllers Returns information about both RAID controller modules in the
controller
summary
Description
storage array.
Returns information about a specific RAID controller module in
the storage array. Valid RAID controller module identifiers are 0
or 1, where, 0 is the RAID controller module on the left and 1 is
the RAID controller module on the right when viewed from the
rear of the enclosure. You must put brackets ([ ]) around the
RAID controller module identifier.
Returns a concise list of information about both RAID
controller modules in the storage array.
Script Commands
277