Stop Configuration Database Diagnostic; Stop Diskgroup Blink; Stop Enclosure Blink - Dell PowerVault MD3620f Command Line Interface Manual

Stop Configuration Database Diagnostic

This command stops the diagnostic test to validate the configuration
database in the controller firmware that was started by the start
storageArray configDbDiagnostic command.
Syntax
Stop storageArray configDbDiagnostic
Parameters
None.
NOTE:
The controller firmware returns a confirmation that the diagnostic test was
cancelled. In addition, the database configuration diagnostic test can be started
through the storage management software GUI but cannot be stopped through the
storage management software GUI. If you want to stop a running diagnostic test,
you must use the
command.
Stop Disk Group Blink
This command turns off the indicator LED on the physical disk that was
turned on by the start diskGroup blink command.
Syntax

stop diskGroup blink

Parameters
None.

Stop Enclosure Blink

This command turns off the indicator LED on the enclosure that was turned
on by the start enclosure blink command.
Syntax
stop enclosure blink
Parameters
None.
304
Script Commands
stop storageArray configDbDiagnostic