Save Storage Array Events - Dell PowerVault MD3620f Command Line Interface Manual

Parameter
lunMappings
NOTE:
When you use this command, you can specify any combination of the
parameters for global setting, virtual disk configuration setting, host topology, or
LUN mapping. To enter all settings, use the
optional; you do not have to enter any parameters.

Save Storage Array Events

This command saves events from the Major Event Log (MEL) to a file. You
can save either all the events or only the critical events.
Syntax
save storageArray (allEvents | criticalEvents)
file="filename" [count=numberOfEvents]
Parameters
Parameter
file
count
Description
Saves the LUN mapping to the file. To save the LUN
mapping, set this parameter to TRUE. To prevent
saving the LUN mapping, set this parameter to FALSE.
The default value is FALSE.
allConfig
Description
Name of the file to which to save the events. You must
put quotation marks (" ") around the file name.
Specifies the number of events or critical events to save
to a file. If you do not enter a value for the count, all
events or critical events are saved to the file. If you enter
a value for the count, only that number of events or
critical events (starting with the last event entered) are
saved to the file. Use integer values.
parameter. The parameters are
Script Commands
223