Show Physical Disk Download Progress; Show Raid Controller Module - Dell PowerVault MD3620f Command Line Interface Manual

Show Physical Disk Download Progress

This command returns the status of firmware downloads for the physical disks
targeted by the download physicalDisk firmware or download storageArray
physicalDiskFirmware commands.
Syntax
show allPhysicalDisks downloadProgress
Parameters
None.
NOTE:
When all firmware downloads have successfully completed, this command
Successful
returns a
the firmware download status of each targeted physical disk. This command returns
the status values shown in the following table.
Status
Successful
Not Attempted
Partial Download
Failed

Show RAID Controller Module

For each RAID controller module in a storage array, this command returns the
following information:
• Status (Online, Offline)
• Current firmware and NVSRAM configuration
• Pending firmware and NVSRAM configuration configurations (if any)
• Board ID
• Product ID
• Product revision
• Serial number
• Date of manufacture
276
Script Commands
status. If any firmware downloads fail, this command shows
Definition
Downloads completed without errors.
Downloads did not start.
Downloads are in progress.
Downloads completed with errors.