Create Host Group; Create Host Port - Dell PowerVault MD3620f Command Line Interface Manual

Create Host Group

This command creates a new host group.
Syntax
create hostGroup userLabel="hostGroupName"
Parameter
Parameter
userLabel

Create Host Port

This command creates a new HBA host port identification. The identification
is a software value that represents the physical HBA host port to the RAID
controller module. Without the host port identification, the RAID controller
module cannot receive instructions or data from the host port.
Syntax
create hostPort identifier="wwid"
userLabel="portLabel"
host="hostName"
interfaceType=SAS
Parameters
Parameter
identifier
userLabel
160
Script Commands
Description
Name to give the host group that you are
creating. You must put quotation marks (" ")
around the host group name.
Description
WWID of the HBA host port. You must
put quotation marks (" ") around the
WWID.
Name to give the new HBA host port. You
must put quotation marks (" ") around
the port label.