Save Storage Array Iscsi Statistics - Dell PowerVault MD3620f Command Line Interface Manual

Save Storage Array iSCSI Statistics

This command saves the iSCSI performance of the storage array to a file. The
following statistics are saved to the file:
• Statistics related to the physical Ethernet port
• Statistics related to the TCP protocol
• Statistics related to the IP protocol
Syntax
save storageArray iscsiStatistics [raw | baseline]
file="filename"
Parameters
Parameter
raw
baseline
file
NOTE:
If you have not reset the iSCSI baseline statistics since the RAID controller
module start-of-day, the time at the start-of-day is the default baseline time.
224
Script Commands
Description
This parameter defines that the statistics collected are all
statistics from the RAID controller module start-of-day.
Enclose the parameter in square brackets ([ ]).
This parameter defines that the statistics collected are all
statistics from the time the RAID controller modules were
reset to zero using the reset storageArray iscsiStatsBaseline
command. Enclose the parameter in square brackets ([ ]).
The name of the file to which you want to save the
performance statistics. Enclose the file name in double
quotation marks (" ").
NOTE:
This command does not automatically append a file
extension to the new file. You must specify the file extension
when you enter the file name.