Set Iscsiinitiator - Dell PowerVault MD3620f Command Line Interface Manual

Set iSCSI Initiator
This command sets the attributes for an iSCSI initiator.
Syntax
set iscsiInitiator (["iscsiID"]|
userLabel="newName" |
host="newHostName" |
chapSecret="newSecurityKey")
Parameters
Parameter Description
The name of the iSCSI initiator for which you want to set attributes.
iscsiID
The new name that you want to use for the iSCSI initiator.
userLabel
The name of the new host to which the HBA host port is connected.
host
Enclose the host name in double quotation marks (" ").
The password that you want to use to authenticate a peer connection.
chapSecret
NOTE:
Challenge Handshake Authentication Protocol (CHAP) is a protocol that
authenticates the peer of a connection. CHAP is based upon the peers sharing a
"secret." A secret is a security key that is similar to a password.
NOTE:
Use the
mutual authentication.
chapSecret
parameter only for initiators requiring
Script Commands
237