Create Iscsi Initiator; Create Raid Virtual Disk (Automatic Physical Disk Select) - Dell PowerVault MD3620f Command Line Interface Manual

Create iSCSI Initiator

This command creates a new iSCSI initiator object.
Syntax
create iscsiInitiator iscsiName = "iSCSI-ID"
userLabel = "name"
host = "host-name"
[chapSecret = securityKey]
Parameters
Parameter
iscsiName
userLabel
host
chapSecret
NOTE:
Challenge Handshake Authentication Protocol (CHAP) is a protocol that
authenticates the peer of a connection. CHAP is based upon the peers sharing a
"secret." A secret is a security key that is similar to a password. Use
chapSecret only for initiators requiring mutual authentication.

Create RAID Virtual Disk (Automatic Physical Disk Select)

This command creates a disk group across the storage array physical disks,
and a new virtual disk in the disk group. The RAID controller modules in the
storage array choose the physical disks to include in the virtual disk.
Syntax
create virtualDisk physicalDiskCount=
numberOfPhysicalDisks
diskGroupUserLabel="diskGroupName"
raidLevel=(0 | 1 | 5 | 6)
userLabel="virtualDiskName"
[physicalDiskType=(SAS)
162
Script Commands
Description
The default identifier of the iSCSI initiator.
The name that you want to use for the iSCSI initiator. Enclose
the name in double quotation marks (" ").
The name of the host in which the iSCSI initiator is installed.
The password that you want to use to authenticate a peer
connection.