Dell PowerVault MD3620f Command Line Interface Manual page 274

Parameters
Parameter
allPhysicalDisks
driveMediaType
physicalDiskType
physicalDisk or
physicalDisks
summary
274
Script Commands
Description
Returns information about all physical disks in
the storage array.
NOTE:
To determine information about the type
and location of all physical disks in the storage
allPhysicalDisks
array, use the
retrieve information. Valid physical disk media
are these:
• HDD—Use this option when you have hard
physical disks
• in the expansion enclosure.
• SSD—Use this option when you have solid
state physical disks in the expansion enclosure.
• unknown—Use if you are not sure what types of
physical disk media are in the expansion
enclosure.
• allMedia – Use this option when you want to
use all types of physical disk media that are in
the expansion enclosure.
The type of physical disk for which you want to
retrieveinformation. The valid physical disk type
is SAS.
Identifies the enclosure and slot where the
physical disk resides. You can enter enclosure IDs
and slot IDs for one or several physical disks.
Enclosure ID values are 0 to 99. Slot ID values
are 0 to 31. You must put parentheses around the
enclosure ID values and the slot ID values.
Returns the status, capacity, data rate, product
ID, and firmware version for the specified
physical disks.
NOTE:
To determine the type of physical disk in a
specific location, use the
and enter the enclosure and slot IDs for the
physical disk.
parameter.
physicalDisk
parameter,