Dell PowerVault MD3620f Command Line Interface Manual page 208

Additional Information
NOTE:
You can use any combination of alphanumeric characters, hyphens, and
underscores for the names. Command names can have a maximum of 30
characters. If you exceed the maximum character limit, replace square brackets
([ ]) with angle brackets (< >) to overcome this limitation.
You can recreate a single Snapshot virtual disk or multiple Snapshot virtual
disks with optional parameters:
• If you specify one or more of the optional parameters, the re-create
operation processes each snapshot virtual disk separately.
• If you try to use the same user label for more than one virtual disk, the
command fails.
• If you do not set the warningThresholdPercent parameter or the
repositoryFullPolicy parameter, values that you previously set are used.
You can recreate multiple Snapshot virtual disks without optional parameters:
• If you list multiple snapshot virtual disks to be re-created but do not
specify any of the optional parameters, the re-create operation processes
the snapshot virtual disks as a batch process.
• Validation checks for the necessary snapshot-restarted preconditions are
performed before restarting any snapshot. If any of the listed snapshot
virtual disks fail the validation, the entire command fails and the snapshot
virtual disks are not re-created. If the validation is successful for all of the
snapshot virtual disks in the list, but one or more of the snapshots in the
list fails to restart, the entire command fails and none of the snapshots are
re-created.
• During snapshot re-creation, all affected virtual disks (snapshots, base, and
repository) are appropriately quiesced and I/O operations are resumed to all
affected virtual disks after all snapshots have been successfully re-created.
NOTE:
If the
parameter is not specified, the previously set values are used. If you use the
optional parameters, the re-create Snapshot processes each snapshot virtual disk
separately. If the same userLabel (name) is specified for more than one virtual disk,
the command fails. If no optional parameters are specified, the re-create Snapshot
processes the specified snapshot virtual disks as a batch, provided a validation
check of all of the virtual disks runs successfully. If successful, the snapshots start
the re-creation process and all of the affected virtual disks (snapshot, source, and
repository) are quiesced until the process is complete.
208
Script Commands
warningThresholdPercent repositoryFullPolicy
parameter or the