Ac Characteristics; Symbol Description; Ac Characteristics Measurement Condition - Epson CMOS 32-Bit Single Chip Microcomputer S1C33L03 Technical Manual

Cmos 32-bit single chip microcomputer
Table of Contents

Advertisement

8 ELECTRICAL CHARACTERISTICS

8.6 AC Characteristics

8.6.1 Symbol Description

t
: Bus-clock cycle time
CYC
t
• In x1 mode,
CYC
t
CYC
t
• In x2 mode,
CYC
t
CYC
t
CYC
WC: Number of wait cycles
Up to 7 cycles can be set for the number of cycles using the BCU control register. Furthermore, it can be
extended to a desired number of cycles by setting the #WAIT pin from outside of the IC.
The minimum number of read cycles with no wait (0) inserted is 1 cycle.
The minimum number of write cycles with no wait cycle (0) inserted is 2 cycles. It does not change even if
1-wait cycle is set. The write cycle is actually extended when 2 or more wait cycles are set.
When inserting wait cycles by controlling the #WAIT pin from outside of the IC, pay attention to the
timing of the #WAIT signal sampling. Read cycles are terminated at the cycle in which the #WAIT signal
is negated. Write cycles are terminated at the following cycle after the #WAIT signal is negated.
C1, C2, C3, Cn: Cycle number
C1 indicates the first cycle when the BCU transfers data from/to an external memory or another device.
Similarly, C2 and Cn indicate the second cycle and nth cycle, respectively.
Cw: Wait cycle
Indicates that the cycle is wait cycle inserted.

8.6.2 AC Characteristics Measurement Condition

Signal detection level:
Input signal waveform: Rise time (10%
Output load capacitance: C
A-78
= 50 ns (20 MHz) when the CPU is operated with a 20-MHz clock
= 30 ns (33 MHz) when the CPU is operated with a 33-MHz clock
= 50 ns (20 MHz) when the CPU is operated with a 40-MHz clock
= 40 ns (25 MHz) when the CPU is operated with a 50-MHz clock
= 33 ns (30 MHz) when the CPU is operated with a 60-MHz clock
Input signal
High level
Low level
Output signal High level
Low level
The following applies when OSC3 is external clock input:
Input signal
High level
Low level
90% V
Fall time (90%
10% V
= 50 pF
L
V
= V
- 0.4 V
IH
DDE
V
= 0.4 V
IL
V
= 1/2 V
OH
DDE
V
= 1/2 V
OL
DDE
V
= 1/2 V
IH
DD
V
= 1/2 V
IL
DD
) 5 ns
DD
) 5 ns
DD
EPSON
S1C33L03 PRODUCT PART

Advertisement

Table of Contents
loading

Table of Contents