Toshiba Strata CTX Programming Manual page 146

Trunks
309 Direct Inward Dialing
F
IELD
Audio Day1 Destination
Audio Day2 Destination
Audio Night Destination
08 Data Day1 Dst Type
09 Data Day2 Dst Type
10 Data Night Dst Type
Data Day1 Destination
Data Day2 Destination
Data Night Destination
11 DNIS VMID Code
12 DNIS Name
6-14
D
ESCRIPTION
Enter the Destination Directory Number or Access Code.
Possible values: Up to 32 digits (default = no value)
If Dialing Digits is the Destination Type enter the Directory Number that the line
should ring. If the line should ring over external page, enter #31xx, where xx is
the external Page group number. If the default page access code #31 was
changed, use the new page access code as the leading digits.
Line access codes and network routing numbers can also be entered to route
incoming calls back out to a public or private network number.
Select the Destination Type for data calls
Possible values: No Data (default), Dialing Digits, DISA, Built-in Modem or
Night Bell
Enter the Destination Directory Number or Access Code.
Possible values: Up to 32 digits (default = no value)
If Dialing Digits is the Destination Type enter the Directory Number that the line
should ring. If the line should ring over external page, enter #31xx, where xx is
the external Page group number. If the default page access code #31 was
changed, use the new page access code as the leading digits.
Line access codes and network routing numbers can also be entered to route
incoming calls back out to a public or private network number.
Enter the VM mail box number which should answer calls for this DID/DNIS
number.
Possible values: Up to 10 digits (default = no value)
Note This code is only sent if using SMDI VM integration in Program 580, 01.
This code will be replaced, after voice mail answers, by the DTMF code
set in Program 309, 15 DID/DNIS DTMF VMID code - if programmed;
therefore, if using Program 309, 15 code, this VMID code is not
necessary.
This mail box number will be sent to voice mail on a DID/DNIS call that rings
directly to voice mail; and, on a direct DID/DNIS call to a DN that forwards to
voice mail before it is answered by the DN.
If a DID/DNIS call is answered by a station and then transferred to a DN that
forwards to voice mail, this mail box number of the DID/DNIS number or the
forwarding DN's mail box number will be sent to voice mail per Program 579, 01.
If this VMID code is not set, direct DID/DNIS calls will go to the VM general
greeting and DID/DNIS calls that forward from a DN to VM will go to the DN's
VMID mail box.
This Voice Mail box number is added to SMDI packets direct and forwarded
DID\DNIS calls to voice mail as explained above.
Enter DNIS name. DNIS names can be assigned from the CTX WinAdmin (not
from programming phones).
Possible values: Up to 16 ASCII characters (default = no value)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03