Series Programs - Toshiba Strata CTX Programming Manual

Digital business telephone systems
Hide thumbs Also See for Strata CTX:
Table of Contents

Advertisement

Telephone Button Programming

500 Series Programs

500 Series Programs
Programs 500~577
Button
Sequence
500
System Call Forward
Assignment
,
$
C‚yq
500-00
SCF Number
n,
C‚yq
500-01
Call Type
, n,
A7
C‚yq
500-02
Period
, n,
A7!
C‚yq
500-03
Telephone Status
, n,
A7"
C‚yq
500-04
Destination 1
, n,
,
A7#
C‚yq
501
System Speed Dial
Assignment
,
$
C‚yq
501-00
Speed Dial Bin
n,
C‚yq
501-01
Number
, n,
A7
C‚yq
501-02
Name
, n,
,
A7!
C‚yq
502
Terminal Paging
Group Assignment
,
$!
C‚yq
502-00
Primary DN
n,
C‚yq
502-
PG01~PG16
01~16
~
, n,
A7
A7 %
13-72
Value(s)
n =
1~4 (CTX100)
1~10 (CTX670 Basic)
1~32 (CTX670 Exp.)
n =
1. CO Loop Ground
2. DID
3. Tie
4. Ring Transfer
5. Internal
n =
1. Day
2. Day2
3. Night
n =
1. Busy
2. Off No Answer
3. Busy No Answer
4. DND
n =
Up to 32 digits
C‚yq
n =
000~799
n =
Up to 32 digits, 0~9, *, #
and Pauses
n =
Up to 8 digits
C‚yq
n =
Up to 5 digits
n =
1. On
2. Off (default)
C‚yq
This assignment is used to configure up to 32 system call forward
patterns. Station DNs are assigned to these patterns in the station
COS assignments.
Note
The Administrator programs the condition of transfer by
setting Call Type, Period and Telephone Status. Destinations
1 and 2 should be programmed after transfer conditions are
set.
Select the SCF pattern number to configure.
Select the type of call that should forward in this pattern.
Note
Each 500-01 call type must be the same telephone status.
Also, all calls must be the same Call Forward type.
Select the system time period in which this SCF pattern should
operate.
Select the telephone DN status that should cause this SCF pattern to
operate.
Note
Each 500-01 call type must be the same telephone status.
Also, all calls must be the same Call Forward type.
Select the first destination to which the call should forward.
System Speed Dial consists of up to 800 pre-programmed numbers
each containing up to 32 digits. If the number being entered exceeds
the 32 digits, the next speed dial location will automatically be
appended to create longer numbers. One other speed dial location
can be nested within the number for dialing a common routine with
the number (see "516 Station Speed Dial" on page 5-31 for more
information about nesting).
Enter the speed dial bin location.
This is the dialable number stored in the speed dial bin.
Note
To enter pauses enter Px, where x equals 1~9 (seconds),
which is the length of the pause.
This is the Name that appears on Telephone LCD dial directories.
Note
This feature is available in CTX WinAdmin and Strata
DKT30xxSD only.
Assigns Primary DNs to Paging Group(s).
Enter the Primary DN of the station to be assigned to Paging Groups.
A station may belong to more than one paging group.
Note
You can have upto 72 paging groups in the Strata CTX100
and upto 120 paging groups in the Strata CTX670. Any
software release before R1.01, M19 supports only 32 paging
groups for all systems.
Activate the Paging Group(s) this station belongs too. The number of
DNs that can be assigned are 1~4 (CTX100), 1~8 (CTX670 Basic),
1~16 (CTX670 Exp.)
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Summary

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Strata ctx100Strata ctx670

Table of Contents