Data Backup - Toshiba Strata CTX Programming Manual

)%
1. Press to view parameter. The MAC Address is view only and cannot be changed.
+ROG
2. Press (twice) to exit to the
3. Enter another program number to continue programming or press
mode.

Data Backup

This program enables you to Back up system data to a SmartMedia card.
Program Number(s): 910
Prerequisite Program:
Reference:
Access Sequence:
FB Name
Backup Function
Numbers
Current Number
Backup State
Before running this program, make sure the SmartMedia card is properly formatted. See
Note
Unmount SmartMedia"
)%
1. Press to enter your Backup choice. Press the
options.
 )%
2. Press .
+ROG
3. Press to execute. Press
programming mode from your telephone.
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
352*
= prompt.
"Format/Unmount SmartMedia"
None
Login to programming mode from your telephone button pad:
+ROG ✱ ✱ ✱✱✱.
At the PASSWORD= prompt, Enter your password and press +ROG.
At the PROG= prompt enter  and press +ROG.
FB Summary
01 Start and Stop system backup.
Note Restore function is not operational
and should never be executed.
Use System Initialize
900) Level 1 to restore system
backup.
02 The number of data blocks. This number
varies depending on the amount of
programming the system contains.
03 This number increments as the backup
progresses. When the backup is complete
this number should match the total number
of data blocks displayed in Numbers
()%).
04 All_Ok – Backup completed with no errors.
Partial_Ok – Backup has completed with
errors.
NG – Backup has failed.
Cancel – Cancel Backup.
Importing – Program data is being
restored.
Exporting – Program data is being sent out.
on page 13-101
)%
and should blink green.
+ROG
again to Cancel. This program stops running if you exit
on page 13-101
1:Backup
2:Restore (Do not
use. See Note on
(Program
left).
3:Cancel
Variable
Variable
1:normal end all
2:normal end part
3:abnormal end
4:cancel
5:importing
6:exporting
for more details.
6FUROO 3DJH
or button to view your selection
Telephone Button Programming
900 Series Programs
+ROG
again to exit programming
Value LCD Prompt
1:BACKUP
2:RESTORE
3:CANCEL
ALL NO=
CUR NO=
"Format/
13-103