Lcr Route Definition Assignment; Modified Digits Table Assignment - Toshiba Strata CTX Programming Manual

525 LCR Route Definition Assignment

Prerequisite Program:
This command assigns Route Definitions for LCR. A Route Definition consists of an OLG and a Digit
Modification index.
F
IELD
00 Route Definition
01 OLG Number
02 Digit Modification Index

526 Modified Digits Table Assignment

Prerequisite Program:
This command modifies LCR dialed numbers by deleting digits from and adding digits to the dialed
numbers.
F
IELD
00 Digit Modification Index
01 Delete Digits
02 Add Leading Digits
03 Add Trailing Digits
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
520 on page 9-8
D
ESCRIPTION
Select the Route Definition number.
Possible values: 1~128 (default = no value)
Select the OLG Number associated with this Route Definition.
Possible values: 1~128 (default = 1)
Select the Digit Modification number associated with this Route Definition.
Possible values: 1~128 (default = 1)
521 on page 9-9
D
ESCRIPTION
Select the Digit Modification Index used by the LCR Route Choice table to
determine the digit modification treatment to be applied. Leading digits of a
dialed number may be deleted; leading and trailing digits may be added to the
dialed number.
Possible values: 1~128 (default = no value)
Select the quantity of digits to be deleted from the beginning of dialed number.
Possible values: 0~10 (default = 0)
Enter the digit string to be inserted at the beginning of the number.
Possible values: Up to 23 ASCII characters (default = no value)
Enter the digit string to be inserted at the end of the number.
Possible values: Up to 23 ASCII characters (default = no value)
Least Cost Routing/Destination Restriction
Services
9-11