Toshiba Strata CTX Programming Manual page 415

Program Code
80
96
202
96
98
49
51
203
51
52
80
49
52
204
80
98
98
33
33
48
49
205
49
49
49
Strata CTX Programming - Part 4: Appendices 04/03
Sub-
FB
parameter
A PCB without ISDN extension settings allowed' is designated
A7
for the PCB connecting the ISDN extension(s) selected.
The number of channel group exceeds the system capacity
A7!
when ISDN station is registered.
The quantity of lines, ISDN channels and PDNs entered
A7
exceeds the number of ports licensed with this processor.
The quantity of station speed dial bins entered exceeds the
A7"$
system's capacity.
The new DN value conflicts with an existing value DN, PhDN,
A7
etc.
The Primary DN entered conflicts with a value of an existing
-
numbering scheme.
The new DN value conflicts with an existing numbering
A7
scheme value.
The new DN value conflicts with existing group extensions.
A7
The new DN value does not exist.
A7
The number of attendant consoles exceed the number
A7
specified in the system.
DKT is not assigned to DN (ISDN, etc.).
A7
The DN entered is an extension number that does not exist.
A7
Allowable Feature Button number is exceeded.
A7#
Allowable Call History Memory size is exceeded.
A7 &
100 Sub-parameters must be assigned.
110
120
A7
130
140
120 The line number entered is out of range for the system's
capacity.

Required parameter for each Feature Code is not entered.
110 Two or more PhDNs with the same value are registered to one
A7
extension.
700 Only Feature Code(s) allowed for Attendant Console is
790 registered.
800
A7
810
820
830
610 Two or more DSSs with the same value are registered to one
A7
extension.
120 While assigning sub-parameters to a DN: A DN was selected
130 that does not exist in the system.
A7
560
610
Station Programming Error Codes
Error Descriptions
System Error Codes
B-5