Make Busy Control - Toshiba Strata CTX Programming Manual

Before running this program, make sure the SmartMedia card is properly formatted. See
Note
Unmount SmartMedia"
)%
1. Press to enter your Backup choice. Press the
options.
 )%
2. Press .
+ROG
3. Press to execute. Press
programming mode from your telephone.

Make Busy Control

When an error occurs in hardware resources used for a station or a line fails, this feature makes them busy.
The station or line PCB can be disabled temporarily to perform maintenance or parts replacements as well.
This program is only available in the telephone button programming mode.
Program Number(s): 912
Prerequisite Program:
Reference:
Access Sequence:
Note The Shelf number is entered in "XX" format where Shelf is a two digit value from 01~07
corresponding to the Strata CTX Cabinet number. See
description of the LED display.
FB Name
Equipment
Slot #1
Slot #2
Slot #3
Slot #4
Slot #5
Slot #6
Slot #7
Slot #8
Slot #9
Slot #10
)% )%
1. Press ~
Access Sequence above.
The slot to which your programming phone is connected can not be set to Make Busy.
Note
+ROG
2. Press to execute.
+ROG
3. Press again to return to
+ROG
4. Press
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
on page 13-101
)%
and should blink green.
+ROG
again to Cancel. This program stops running if you exit
Format SmartMedia Card
None
Login to programming mode from your telephone button pad:
+ROG ✱ ✱ ✱✱✱.
At the PASSWORD= prompt, Enter your password and press +ROG.
At the PROG= prompt enter  and press +ROG.
At the CABINET= prompt enter the Shelf number.
FB Summary
00 Enter Cabinet Number
01
02
03
04
05
Enter  or 
06
07
08
09
10
to enter your Make Busy selection for the appropriate Slot in the Cabinet entered in
= prompt.
CABINET
to return to the = prompt.
PROG
for more details.
6FUROO 3DJH
or button to view your selection
"Program Button
Value
01~07 (value=xx)
1: Set make busy
2: Clear make busy
Telephone Button Programming
900 Series Programs
"Format/
LEDs" below for a
13-105