Toshiba Strata CTX Programming Manual page 405

IP Telephone Start Up Sequence
After the IP telephone network setting has been programmed, the following displays occur after the IP
telephone is hung-up:
Action
1. IPT
initializes.
2. IPT
IPADDRESS SETTING...
searches
for IP
address.
3. IPT
SEARCHING BIPU
searches
for BIPU.
4. Registering
REGISTERING IPT...
to BIPU
5. Registering LCD data is indicated from
completion
CTX. Example:
- normal
action.
FEB 28
Strata CTX Programming - Part 4: Appendices 04/03
LCD Indication
INITIALIZING
PLEASE WAIT
Possible errors:
• IP address is
• No DHCP
If error occurs, IP address setting is carried out
continuously.
Retries every 10 seconds.
Possible errors:
• BIPU is not
• BIPU is not
• BIPU is not
• Multicast
• BIPU IP
When registering fails, IPT retries by starting at
Step 2 again.
Error message:
"Exxx" is error
number.
NO. 205
THURSDAY
Remarks
IPADDRESS SETTING...
not set.
CAN'T SET IPADDRESS
server, etc.
SEARCHING BIPU
found "time
BIPU NOT FOUND
out."
SEARCHING BIPU
found (Station
CAN'T GET STATIONID
ID automatic
setting).
SEARCHING BIPU
found
STATION ID UNMATCH
(StationID
manual setting)
address is
NOT EXIST MULTICAST ADDR
not
registered (BIPU IP address setting mode is
automatic setting by multicast)
address is not
NOT EXIST BIPU ADDRESS
registered
(BIPU IP address setting mode is manual
setting.
REGISTERING IPT...
CAN'T REGISTER IPT:EXXX
Applications, Tips and Tricks
IPT1020-SD Telephone Network Settings
A-9