Behind Centrex Assignment - Toshiba Strata CTX Programming Manual

Table 9-1 Circuit Type Code Definitions
Circuit Name Circuit Type
DN
CO
GCO
POOL

650 Behind Centrex Assignment

Prerequisite Program:
This feature allows Strata CTX to connect to the station side of a PBX or Centrex using a physical loop
trunk interface. DR and Least Cost Routing may need to account for access codes required by the PBX or
Centrex before connecting to the public network.
1. Complete the
Assignment Record Sheet"
below.
2. From the Program Menu, click Services >
Miscellaneous > Behind Centrex
Assignment.
3. Click Submit.
F
IELD
00 OLG Number
01 Behind Centrex
02 Assume 9
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
Circuit Number
1 0~99999 (DN)
2 1~264 (Trunk Number)
3 1~128 (GCO Key Group Number)
4 1~128 (POOL Key Group Number)
None
"Behind Centrex
on page D-52
D
ESCRIPTION
Select OLG that is attached to a Centrex (or other PBX).
Possible values: 1~32 (CTX100), 1~50 (CTX670 Basic),
Enable Behind Centrex Operation for this OLG.
Possible values: Enable or Disable (default)
Enable the Assume 9 feature.
Possible values: Enable or Disable (default)
if DN is 200, value is 1200
if CO is 30, value is 230
if GCO is 50, value is 350
if POOL is 80, value data is 480
1~128 (CTX670 Exp.), (default = no value)
Example
Services
Networking
9-47