Toshiba Strata CTX Programming Manual page 171

Step 4: Assign DID/DNIS VMID Codes for ILG
1. From the Step 4: Assign DID/DNIS
Number VMID Codes for ILG 2
screen, assign VMID codes for all
DID/DNIS numbers in the selected
ILG. See field descriptions below.
2. (Optional) Click DID/DNIS Table
View to view existing DID/DNIS
assignments. For more details,
see "DID/DNIS Table View" on page
6-21.
3. After selecting VMID code
assignments, click Submit to register
them in the CTX database.
F
IELD
Set for DID/DNIS Number
range:
Set for:
DTMF VMID
SMDI VMID
All
Set the VMID range
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
D
ESCRIPTION
Specify the range of DID/DNIS numbers for which VMID code assignments
should be made. Use the First Number/Last Number drop down arrows.
The codes can be set independently for DTMF in band or SMDI Voice Mail
integration.
Select to set VMID code assignments for DTMF voice mail integration.
Select to set VMID code assignments for SMDI voice mail integration.
Select to set VMID code assignments for DTMF and SMDI voice mail
integration.
Note DTMF and SMDI Voice Mail integration will not function simultaneously
on CTX.
Select the method in which VMID codes should be created:
Use DNIS as VMID - the VMID code for each DID/DNIS number will be the
same as the DID/DNIS number.
Start with - enter the VMID that should be assigned to the first selected DID/
DNIS number. VMID codes will be assigned consecutively, starting with this
code, to each consecutive DID/DNIS number.
Only Use - all selected DID/DNIS numbers will be assigned to the VMID code
entered here.
Add to front - these digits will be added in front of each VMID code.
Add to End - these digits will be added to the end of each VMID code.
Trunks
Trunk DID/DNIS Setup Wizard
6-39