Telephone Button Programming
900 Series Programs
5. Enter another program number to continue programming or press
mode.
Program Button LEDs
The LED blink pattern indicates the following:
• Red continuous blinking – PCB experienced a Make Busy status error.
• Red continuous illumination – PCB Make Busy Status mode is on.
• Green continuous blinking – PCB Make Busy Status mode is stand by.
• Green intermittent blinking – PCB Make Busy Status mode is idle.
Regional Selection
Set Operating region for your Strata CTX. This assignment sets built-in core LSI hardware parameters that
are not changeable with jumpers or switches. These parameters must be set unique for each country and
affect system operation.
Program Number(s): 915
Prerequisite Program:
Reference:
Access Sequence:
FB Name
Region
)%
1. Press
+ROG
2. Press
3. Enter another program number to continue programming or press
mode.
13-106
None
None
Login to programming mode from your telephone button pad:
+ROG ✱ ✱ ✱✱✱.
At the PASSWORD= prompt, Enter your password and press +ROG.
At the PROG= prompt enter and press +ROG.
FB
Summary
01
Set region number. 0~2 are valid entries for
North American Operations.
+ROG
. Enter
~
. Press
.
(twice).
0~31 (USA = 0,
Canada = 1, and
Mexico = 2).
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
+ROG
again to exit programming
Value
LCD Prompt
REGION=
+ROG
again to exit programming