Node Id Assignment - Toshiba Strata CTX Programming Manual

656 Node ID Assignment

Prerequisite Program:
This program assigns up to four Network Node IDs to process incoming network calls. Each Node ID has
an overlap code. Strata CTX will substitute the Overlap Code for the Node ID before processing the call
further. A Network Directory Number consists of a Node ID and the desired node.
1. From the Program Menu, click
Services > Networking > Node ID.
2. Enter Program 656 data.
3. Click Submit.
F
IELD
01 Primary Node ID
Primary Overlap Code
02 Node ID 2
Overlap Code 2
03 Node ID 3
Overlap Code 3
04 Node ID 4
Overlap Code 4
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
102 on page 4-3
D
ESCRIPTION
Enter the Primary Node ID for this node. This Node ID identifies the node
used for administering Strata Net.
Possible values: Up to 6 ASCII characters (default = no value)
Enter the Overlap Code associated with the Primary Node ID. An Overlap
Code is the string of digits that replaces the Node ID to continue call
processing.
Possible values: Up to 4 ASCII characters (default = no value)
Enter Node ID 2 for this node.
Possible values: Up to 6 ASCII characters (default = no value)
Enter Overlap Code for Node ID 2.
Possible values: Up to 4 ASCII characters (default = no value)
Enter Node ID 3 for this node.
Possible values: Up to 6 ASCII characters (default = no value)
Enter Overlap Code for Node ID 3.
Possible values: Up to 4 ASCII characters (default = no value)
Enter Node ID 4 for this node.
Possible values: Up to 6 ASCII characters (default = no value)
Enter Overlap Code for Node ID 4.
Possible values: Up to 4 ASCII characters (default = no value)
Services
Networking
9-39