Isdn; Isdn Bri Trunk - Toshiba Strata CTX Programming Manual

Trunks

ISDN

ISDN
The following program enables set up for ISDN related system settings.

317 ISDN BRI Trunk

Prerequisite Program:
1. This command assigns ISDN BRI
Trunks.
1. Complete the
Record Sheets"
the Program Menu, click Trunk >
ISDN > BRI.
2. Enter Channel Group number
...or click one of the following
buttons:
• List – view a summary list of
programmed Trunks.
• Create – Assign a new Trunk
with default settings.
• Copy – Enter a Channel Group
number and click Copy to make a new Trunk assignment with settings copied from the Channel
Group you entered.
• Delete – Delete an Trunk.
3. Enter data.
4. Click Submit.
F
IELD
Channel Group
01 Equipment Number
6-22
100 on page 4-1
"ISDN BRI Station
on page D-19.From
D
ESCRIPTION
Enter the BRI channel Group Number.
Possible values: 1~32 (CTX100), 1~48 (CTX670 Basic), 1~128 (CTX670 Exp),
Enter the equipment number xxyyzz to which the ISDN BRI Trunk is to be
assigned.
Example: If the RBUU is installed in cabinet shelf 5, slot 3, enter 050301 for
circuit 1.
Possible values: xx = Cabinet 01~07; yy = Slot 01~10; zz = Circuit 01~08 or
Cabinet numbers:
•
CTX100 – Select 01 for Base and Expansion cabinet.
•
CTX670 – Select 01 for Base and 02~07 respectively for each Expansion
cabinet.
Slot numbers:
•
CTX100 – Select 01~04 for Base slots and 05~08 for Expansion slots.
•
CTX670 – Select 01~08 for Base slots and 01~10 for Expansion slots.
(default = no value)
01~24 (CTX670)
xx = Cabinet 01; yy = Slot 01~08; zz = Circuit 01~04 (CTX100)
(default = no value).
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03