Configuring And Viewing Isdp Information; Global Configuration; Figure 70: Isdp Global Configuration; Table 62: Isdp Global Configuration - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

Configuring and Viewing ISDP Information

The Industry Standard Discovery Protocol (ISDP) is a proprietary Layer 2 network protocol which inter-
operates with Cisco® devices running the Cisco Discovery Protocol (CDP). ISDP is used to share information
between neighboring devices. D-Link DWS-4000 Series switches participate in the CDP protocol and are able
to both discover and be discovered by other CDP supporting devices.

Global Configuration

From the ISDP Global Configuration page, you can configure the ISDP settings for the switch, such as the
administrative mode. To display the ISDP Global Configuration page, click LAN > Administration > ISDP >
Global Configuration in the navigation tree.
The following table describes the fields available on the ISDP Global Configuration page.
Field Description
ISDP Mode Use this field to enable or disable the Industry Standard Discovery Protocol on the
switch.
ISDP V2 Mode Use this field to enable or disable the Industry Standard Discovery Protocol v2 on the
switch.
Message Interval Specifies the ISDP transmit interval. The range is (5–254). Default value is 30 seconds.
Holdtime Interval The receiving device holds ISDP message during this time period. The range is (10–255).
Default value is 180 seconds.
Device ID The Device ID advertised by this device. The format of this Device ID is characterized by
the value of Device ID Format object.
D-Link
Oct. 2015

Figure 70: ISDP Global Configuration

Table 62: ISDP Global Configuration

Configuring and Viewing ISDP Information
Unified Wired and Wireless Access System
Page 149