D-Link DWL-8600AP User Manual page 447

D-Link UWS User Manual
Field
Discovered Access
Points
Connection Failed
Access Points
Authentication Failed
Access Points
Unknown Access Points Number of Unknown APs currently detected on the WLAN. If an AP configured to be
Rogue AP Mitigation
Limit
Rogue AP Mitigation
Count
Maximum Managed
APs in Peer Group
WLAN Utilization
Total Clients
Authenticated Clients Total number of clients in the associated client database with an Authenticated
802.11a Clients
802.11b/g Clients
802.11n Clients
Maximum Associated
Clients
Detected Clients
Maximum Detected
Clients
Maximum
Pre-authentication
History Entries
Total Pre-
authentication History
Entries
Maximum Roam
History Entries
Total Roam History
Entries
AP Provisioning Count Current number of AP provisioning entries configured on the system.
D-Link
Oct. 2015
Table 258: Global WLAN Status/Statistics (Cont.)
Description
APs that have a connection with the switch, but haven't been completely configured.
This value includes all managed APs with a Discovered or Authenticated status.
Number of APs that were previously authenticated and managed, but currently don't
have connection with the Unified Switch.
Number of APs that failed to establish communication with the Unified Switch.
managed by the Unified Switch is detected through an RF scan at any time that it is
not actively managed it is classified as an Unknown AP.
Maximum number of APs for which the system can send de-authentication frames.
Number of APs to which the wireless system is currently sending de-authentication
messages to mitigate against rogue APs. A value of 0 indicates that mitigation is not
in progress.
Maximum number of access points that can be managed by the cluster.
Total network utilization across all APs managed by this switch. This is based on
global statistics.
Total number of clients in the database. This total includes clients with an Associated,
Authenticated, or Disassociated status.
status.
Total number of IEEE 802.11a only clients that are authenticated.
Total number of IEEE 802.11b/g only clients that are authenticated.
Total number of clients that are IEEE 802.11n capable and are authenticated. These
include IEEE 802.11a/n, IEEE 802.11b/g/n, 5 GHz IEEE 802.11n, 2.4GHz IEEE 802.11n.
Maximum number of clients that can associate with the wireless system. This is the
maximum number of entries allowed in the Associated Client database.
Number of wireless clients detected in the WLAN.
Maximum number of clients that can be detected by the switch. The number is
limited by the size of the Detected Client Database.
Maximum number of Client Pre-Authentication events that can be recorded by the
system.
Current number of pre-authentication history entries in use by the system.
Maximum number of entries that can be recorded in the roam history for all
detected clients.
Current number of roam history entries in use by the system.
Monitoring Status and Statistics
Unified Wired and Wireless Access System
Page 447