Viewing Associated Client Neighbor Ap Status; Figure 327: Associated Client Neighbor Ap Status; Table 295: Associated Client Neighbor Ap Status - D-Link DWL-8600AP User Manual
Dws-4000 series access points
Hide thumbs
Also See for DWL-8600AP:
- Administrator's manual (135 pages) ,
- Reference manual (36 pages) ,
- Installation manual (12 pages)
Table of Contents
Advertisement
D-Link UWS User Manual
Field
Bandwidth Limit Down Shows the maximum rate at which the client receives traffic from the AP in bits per
Bandwidth Limit Up
Access Control Down
Access Control Up
Diffserv Policy Down
Diffserv Policy Up
Command Buttons
The page includes the following button:
• Refresh—Updates the page with the latest information.
Viewing Associated Client Neighbor AP Status
The WLAN > Monitoring > Client > Associated Clients > Neighbor APs page for the associated client status
shows information about access points that the client detects. The information on this page can help you
determine the managed AP an associated client might use for roaming. Use the menu above the table to select
the MAC address of the client with the information to view.
Table 295
describes the information available on the Neighbor AP page for the associated client status.
Field
AP MAC Address
Location
Radio
D-Link
Oct. 2015
Table 294: Associated Client QoS Status (Cont.)
Description
second.
The rate shown in this field is the configured value rounded down to the nearest 64
kbps, A value of 0 means no bandwidth limiting is in effect in this direction.
Shows the maximum rate at which the client transmits traffic to the AP in bits per
second.
The rate shown in this field is the configured value rounded down to the nearest 64
kbps, A value of 0 means no bandwidth limiting is in effect in this direction.
Shows which ACL, if any, is applied to traffic from the AP to the client.
Shows which ACL, if any, is applied to traffic from the client to the AP.
Shows which DiffServ policy, if any, is applied to traffic from the AP to the client.
Shows which DiffServ policy, if any, is applied to traffic from the client to the AP.
Figure 327: Associated Client Neighbor AP Status
Table 295: Associated Client Neighbor AP Status
Description
The base Ethernet address of the DWS-4000 Series switch managed AP.
The configured descriptive location for the managed AP.
The radio interface and its configured mode that detected this client as a neighbor.
Monitoring Status and Statistics
Unified Wired and Wireless Access System
Page 502
Hide quick links:
Advertisement
Table of Contents
