D-Link DWL-8600AP User Manual page 294

D-Link UWS User Manual
Field
ICMP Rate Limit Interval
ICMP Rate Limit Burst Size
Maximum Next Hops
Maximum Routes
Global Default Gateway
• If you make any changes to the page, click Submit to apply the changes to the system.
D-Link
Oct. 2015
Table 171: IP Configuration Fields (Cont.)
Description
To control the ICMP error packets, you can specify the number of ICMP error
packets that are allowed per burst interval. By default, the rate limit is 100
packets per second, i.e. the burst interval is 1000 milliseconds. To disable
ICMP rate limiting, set this field to zero. The valid rate interval range is 0 to
2147483647 milliseconds.
To control the ICMP error packets, you can specify the number of ICMP error
packets that are allowed per burst interval. By default, the burst size is 100
packets. When the burst interval is zero, then configuring this field is not a
valid option. The valid burst size range is 1 to 200.
The maximum number of hops supported by the switch. This is a read-only
value.
The maximum number of routes (routing table size) supported by the switch.
(Optional) To edit this field, select the Configure check box and set the global
default gateway to the manually configured value. A default gateway
configured in this field is more preferred than a default gateway learned from
a DHCP server. Only one default gateway can be configured.
Configuring Global and Interface IP Settings
Unified Wired and Wireless Access System
Page 294