Initiating Manual Power Adjustments; Figure 372: Manual Power Adjustments; Table 341: Manual Power Adjustments - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

Initiating Manual Power Adjustments

If you select Manual as the Power Adjustment Mode on the Configuration tab, you can manually initiate the
power adjustment algorithm on the Manual Power Adjustments page.
Field
Current Status
AP MAC Address
Location
Radio
Current Power
New Power
Command Buttons
The page includes the following buttons:
• Apply—Apply the proposed power adjustment to the AP and change the current power level to the new
power.
• Clear—Clear the proposed power adjustment information.
• Refresh—Updates the page with the latest information.
• Start—Initiate the power adjustment algorithm.
D-Link
Oct. 2015

Figure 372: Manual Power Adjustments

Table 341: Manual Power Adjustments

Description
Shows the current status of the plan, which is one of the following states:
• None: The power adjustment algorithm has not been manually run since the last
switch reboot.
• Algorithm In Progress: The power adjustment algorithm is running.
• Algorithm Complete: The power adjustment algorithm has finished running.
• A table displays to indicate proposed power adjustments. Each entry shows the
AP along with the current and new power levels. To accept the proposed change,
click Apply. You must manually apply the power adjustment for the proposed
assignments to be applied.
• Apply In Progress: The switch is adjusting the power levels that the APs use.
• Apply Complete: The algorithm and power adjustment are complete.
Identifies the AP MAC address.
Identifies the location of the AP, which is set in the Valid AP database.
Identifies the radio.
Shows the current power level for the AP.
Shows the proposed power level for the AP.
AP Management
Unified Wired and Wireless Access System
Page 582