Table 355: Radio Settings - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
To change the settings for a radio, you must first select the radio you want to configure (1 or 2). After you
change the settings, click Submit to apply the settings. Changes to the settings apply only to the selected radio.
Field
1-802.11a
2-802.11b/g
State
Radio Scheduler
D-Link
Oct. 2015

Table 355: Radio Settings

Description
From this field, you can select the radio that you want to configure. By default, Radio
1 operates in IEEE 802.11b/g mode, and Radio 2 operates in IEEE 802.11a/n mode. If
you change the mode, the labels for the radios change accordingly. Changes to the
settings apply only to the selected radio.
The DWL-3600AP is a single-radio AP. Any settings you configure for Radio 1
(802.11a) are not applied to the DWL-3600AP. If the selected Hardware Type ID for
the AP profile is DWL-3600AP, the radio selectors are not available.
Specify whether you want the radio on or off by clicking On or Off.
If you turn off a radio, the AP sends disassociation frames to all the wireless clients it
is currently supporting so that the radio can be gracefully shutdown and the clients
can start the association process with other available APs.
From this field, you can impose a time limitation on the radio operation. When you
click this field, you can select a configured AP scheduler profile. To configure AP
scheduler profile, use the WLAN > Scheduler page.
'
Unified Wired and Wireless Access System
Configuring Advanced Settings
Page 611