Ssl/Secure Http Configuration; Figure 256: Secure Http Configuration; Table 221: Secure Http Configuration Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

SSL/Secure HTTP Configuration

Secure HTTP enables the transmission of HTTP over an encrypted Secure Sockets Layer (SSL) or Transport Layer
Security (TLS) connection. When you manage the switch by using a Web interface, secure HTTP can help
ensure that communication between the management system and the switch is protected from
eavesdroppers and man-in-the-middle attacks.
Use the Secure HTTP Configuration page to configure the settings for HTTPS communication between the
management station and the switch.
To display the Secure HTTP Configuration page, click LAN > Security > SSL Configuration in the navigation
menu.
Field
Admin Mode
TLS Version 1
SSL Version 3
HTTPS Port
HTTPS Session Soft Timeout
D-Link
Oct. 2015

Figure 256: Secure HTTP Configuration

Table 221: Secure HTTP Configuration Fields

Description
Enables or Disables the Administrative Mode of Secure HTTP. The currently
configured value is shown when the web page is displayed. The default value
is Disable. You can only download SSL certificates when the HTTPS Admin
mode is disabled.
Enables or Disables Transport Layer Security Version 1.0. The currently
configured value is shown when the web page is displayed. The default value
is Enable.
Enables or Disables Secure Sockets Layer Version 3.0. The currently configured
value is shown when the web page is displayed. The default value is Enable.
Sets the HTTPS Port Number. The value must be in the range of 1 to 65535.
Port 443 is the default value. The currently configured value is shown when
the web page is displayed.
Sets the inactivity timeout for HTTPS sessions. The value must be in the range
of (1 to 60) minutes. The default value is 5 minutes. The currently configured
value is shown when the web page is displayed.
SSL/Secure HTTP Configuration
Unified Wired and Wireless Access System
Page 379