Viewing The Client Cp Association Status; Figure 279: Cp - Client Status; Table 239: Interface - Client Status; Table 240: Cp - Client Status - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
Table 239 describes the fields on the Interface - Client Status page.
Field
MAC Address
IP Address
CP Configuration
Protocol
Verification

Viewing the Client CP Association Status

Use the CP - Client Status page to view clients that are authenticated to a specific CP configuration.
The drop-down menu lists each CP configured on the switch. To view information about the clients connected
to the CP, select it from the list.
The following table describes the fields on the Client CP Association Status page.
Field
MAC Address
IP Address
Interface
Protocol
Verification
D-Link
Oct. 2015

Table 239: Interface - Client Status

Description
Identifies the MAC address of the wireless client. If the MAC address is
marked with an asterisk (*), the authenticated client is authenticated by a
peer switch. In order words, the cluster controller was not the authenticator.
Identifies the IP address of the wireless client.
Identifies the captive portal the client used to access the network.
Shows the current connection protocol, which is either HTTP or HTTPS.
Shows the current account type, which is Guest, Local, or RADIUS.

Figure 279: CP - Client Status

Table 240: CP - Client Status

Description
Identifies the MAC address of the wireless client. If the MAC address is marked with
an asterisk (*), the authenticated client is authenticated by a peer switch. In order
words, the cluster controller was not the authenticator.
Identifies the IP address of the wireless client.
Identifies the interface the client used to access the network.
Shows the current connection protocol, which is either HTTP or HTTPS.
Shows the current account type, which is Guest, Local, or RADIUS.
Captive Portal Configuration
Unified Wired and Wireless Access System
Page 409