Table 275: Neighbor Ap Clients - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

describes the fields you see on the Neighbor Clients page for the managed access point status.

Neighbor Client MAC

Discovery Reason

Command Buttons

The page includes the following buttons:

• Delete All Neighbors—Clears all entries from the Neighbor APs and Neighbor Clients list. The list is

repopulated as neighbors are discovered.

• Refresh—Updates the page with the latest information.

Table 275: Neighbor AP Clients

The Ethernet address of client station.

Received Signal Strength Indication, this is an indicator of the signal strength relative

to the neighbor and may give an idea of the neighbor's distance from the managed

AP. The range is 1–100, where 1 is the weakest signal strength.

The managed AP channel the client frame was received on, which may be different

than the operating channel for this radio.

Indicates one or more discovery methods for the neighbor client. One or more of the

following values may be displayed:

• RF Scan Discovered: The client was reported from an RF scan on the radio. Note

that client stations are difficult to detect via RF scan, the other methods are more

common for client neighbor detection.

• Probe Request: The managed AP received a probe request from the client.

• Associated to Managed AP: This neighbor client is associated to another

• Associated to this AP: The client is associated to this managed AP on the

displayed radio.

• Associated to Peer AP: The client is associated to an AP managed by a peer

• Ad Hoc Rogue: The client was detected as part of an Ad Hoc network.

Indicates the time since this client was last reported from an RF scan on the radio.

Monitoring Status and Statistics

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents