Viewing Rrm Neighbors; Figure 350: Rrm Neighbors; Table 318: Rrm Neighbors Summary - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

Viewing RRM Neighbors

The RRM Neighbors Summary page shows neighbor information for each VAP. This table is visible only from
the Cluster Controller. The Cluster Controller builds the neighbor summary table from RF Scan reports, from
the list of managed APs in the cluster, and from the information available in the profile configuration database.
Use the drop-down menu to view RRM neighbors for a specific AP (identified by MAC address) or to view RRM
neighbors for all APs.
The following table describes the fields on the RRM Neighbors Summary page.
Field
AP MAC Address
VAP MAC Address
Neighbor MAC Address The MAC address of the detected neighbor VAP.
RSSI
SSID
Channel
Age
Command Buttons
The page includes the following button:
• Delete All—Remove all entries from the list.
• Refresh—Updates the page with the latest information.
D-Link
Oct. 2015

Figure 350: RRM Neighbors

Table 318: RRM Neighbors Summary

Description
The MAC address of the managed AP.
The VAP on the managed AP to which the neighbors apply.
The signal strength with which this neighbor is detected
Network name on which the VAP and the neighbor are operating.
Channel on which the neighbor is operating.
Number of seconds since the neighbor AP was detected and reported via the RF-Scan
report.
Monitoring Status and Statistics
Unified Wired and Wireless Access System
Page 531