D-Link DWL-8600AP User Manual page 428

D-Link UWS User Manual
Field
Maximum Requests
VLAN Assigned
VLAN Assigned Reason
Reauthentication Period
Reauthentication Enabled
Key Transmission Enabled
Control Direction
Maximum Users
Unauthenticated VLAN ID
Session Timeout
D-Link
Oct. 2015
Table 251: Port Access Control Status Fields (Cont.)
Description
Displays the configured maximum requests for the selected port. The
maximum requests value is the maximum number of times the authenticator
state machine on this port will retransmit an EAPOL EAP Request/Identity
before timing out the supplicant. The maximum requests value is in the range
of 1 and 10.
Displays the VLAN ID assigned to the selected interface by the Authenticator.
Note: This field is displayed only when the port control mode of the selected
interface is not MAC-based.
Displays the reason for the VLAN ID assigned by the authenticator to the
selected interface. Possible values are:
• Radius
• Unauth
• Default
• Not Assigned
Note: This field is displayed only when the port control mode of the selected
interface is not MAC-based.
Displays the configured reauthentication period for the selected port. The
reauthentication period is the value, in seconds, of the timer used by the
authenticator state machine on this port to determine when reauthentication
of the supplicant takes place. The reauthentication period is a value in the
range of 1 and 65535.
Displays if reauthentication is enabled on the selected port. This is a
configurable field. The possible values are 'true' and 'false'. If the value is 'true'
reauthentication will occur. Otherwise, reauthentication will not be allowed.
This field displays if key transmission is enabled on the selected port. This is
not a configurable field. The possible values are 'true' and 'false'. If the value
is 'false', key transmission will not occur. Otherwise, key transmission is
supported on the selected port.
This displays the control direction for the specified port. The control direction
dictates the degree to which protocol exchanges take place between
Supplicant and Authenticator. This affects whether the unauthorized
controlled port exerts control over communication in both directions
(disabling both incoming and outgoing frames) or just in the incoming
direction (disabling only the reception of incoming frames).
Note: This field is not configurable on some platforms.
Displays the maximum number of clients that can get authenticated on the
port in the MAC-based dot1x authentication mode. This field is configurable.
The maximum users value is in range of 1 to 16.
Displays the Unauthenticated VLAN ID for the selected port. The valid range is
0 to 3965.
Displays the Session Timeout set by the RADIUS Server for the selected port.
Note: This field is displayed only when the port control mode of the selected
port is not MAC-based.
Port Access Control
Unified Wired and Wireless Access System
Page 428