Wds Ap Link Status Summary; Figure 354: Wds Ap Link Status Summary; Table 322: Wds Ap Link Status Summary - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
Command Buttons
The page includes the following button:
• Refresh — Updates the page with the latest information.

WDS AP Link Status Summary

The WDS AP Link Status Summary page displays summary information about the link configuration and link
state in a WDS group.
The following table describes the fields on the WDS AP Link Status Summary page.
Note: The WDS links are bidirectional. The terms Source and Destination simply reflect the WDS link
endpoints specified in the WDS group configuration.
Field
WDS AP Group ID
Source MAC Address
Radio Source
Destination MAC
Address
Destination Radio
Source End-Point
Detected
Destination End-Point
Detected
Aggregation Mode
D-Link
Oct. 2015

Figure 354: WDS AP Link Status Summary

Table 322: WDS AP Link Status Summary

Description
The group number that identifies the configured WDS AP group.
The MAC address of one end-point of the WDS link
The radio number of the WDS link endpoint on the source AP.
The MAC address of the Source AP in the group.
The radio number of the WDS link endpoint on the destination AP.
Indicates whether the AP specified by the destination MAC detected the AP specified
by the source MAC.
Indicates whether the AP specified by the source MAC detected the AP specified by
the destination MAC.
When parallel links are defined between two APs, this field indicates whether this
link is part of the aggregation link pair.
Monitoring Status and Statistics
Unified Wired and Wireless Access System
Page 536