D-Link UWS User Manual
Table 262
describes the fields available on the AP Hardware Capabilities page.
Field
Description
Hardware Type Identifies the ID number assigned to each AP hardware type. The switch supports up to six
different AP hardware types.
Hardware Type
Includes a description of the platform and the supported IEEE 802.11 modes.
Description
Radio Count
Specifies whether the hardware supports one radio or two radios.
Image Type
Specifies the type of software the hardware requires.
AP Hardware Radio Capability
Use the Radio Detail tab under the Hardware Capabilities tab to view radio details.
Table 263 on page 457
describes the fields available on the AP Hardware Radio Capability page.
Field
AP Selector
Radio Selector
Radio Count
Radio Type Description
VAP Count
802.11a Support
802.11bg Support
802.11n Support
802.11ac Support
D-Link
Oct. 2015
Table 262: AP Hardware Capability Summary
Figure 308: Radio Detail
Table 263: AP Hardware Capability Radio Detail
Description
Use the drop-down menu to select the AP model.
If the selected AP is a dual-radio AP, select Radio-1 or Radio-2 to view information
about the selected radio.
Displays the number of radios supported on the hardware platform, which is
either 1 or 2.
Displays the type of radio, which might contain information such as the
manufacturer name and supported IEEE 802.11 modes.
Displays the number of VAPs the radio supports.
Shows whether support for IEEE 802.11a mode is enabled.
Shows whether support for IEEE 802.11bg mode is enabled.
Shows whether support for IEEE 802.11n mode is enabled.
Shows whether support for IEEE 802.11ac mode is enabled.
Monitoring Status and Statistics
Unified Wired and Wireless Access System
Page 457