Configuring The Automatic Power Adjustment - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

Configuring the Automatic Power Adjustment

This example describes how to run and apply the Automatic Power Adjustment (APA) algorithm.
1. To adjust the minimum power level setting on the AP profile, go to the WLAN > Administration > Basic
Settings > Radio page and set the Minimum Power field to a percentage lower than 100, for example 60%.
2. Click Submit.
3. Optionally, select Radio 2 and configure the Minimum Power setting, and then click Submit.
4. If the APs are already managed, use the following steps to reapply the profile so the new settings take
effect:
a. Go to the WLAN > Administration > Advanced Configuration > AP Profiles page.
b. Select the check box next to the profile you modified.
c. Click Apply.
D-Link
Oct. 2015
Optimizing WLAN Traffic
Unified Wired and Wireless Access System
Page 720