D-Link DWL-8600AP User Manual page 712

D-Link UWS User Manual
6. Add the AP to the Valid AP database so that it can become managed when the switch discovers it.
a. Go to the WLAN > Administration > Basic Setup > Valid AP page.
b. Specify the MAC address of the AP in the appropriate field.
c. Optionally, specify the location or a name that identifies the AP, for example AP_1.
d. Click Add.
When the AP becomes managed, the default profile is applied. If you make changes to the default
profile after the AP is managed, you must reapply the profile to push the changes to the AP from the
WLAN > Administration > Advanced Configuration > AP Profiles page.
D-Link
Oct. 2015
Configuring a Network to Use WPA2-Enterprise and Dynamic
Unified Wired and Wireless Access System
VLANs
Page 712