Arp Table Configuration; Figure 185: Arp Table Configuration; Table 168: Arp Table Configuration Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

ARP Table Configuration

Use this page to change the configuration parameters for the Address Resolution Protocol Table. You can also
use this screen to display the contents of the table.
To display the page, click LAN > L3 Features > ARP > ARP Table Configuration in the navigation tree.
Field
Age Time (secs)
Response Time (secs)
Retries
Cache Size
Dynamic Renew
Total Entry Count
D-Link
Oct. 2015

Figure 185: ARP Table Configuration

Table 168: ARP Table Configuration Fields

Description
Enter the value you want the switch to use for the ARP entry ageout time. You
must enter a valid integer, which represents the number of seconds it takes
for an ARP entry to age out. The range for this field is 15 to 21600 seconds. The
default value for Age Time is 1200 seconds.
Enter the value you want the switch to use for the ARP response timeout. You
must enter a valid integer, which represents the number of seconds the switch
waits for a response to an ARP request. The range for this field is 1 to 10
seconds. The default value for Response Time is 1 second.
Enter an integer which specifies the maximum number of times an ARP
request is retried. The range for this field is 0 to 10. The default value for
Retries is 4.
Enter an integer which specifies the maximum number of entries for the ARP
cache. The range for this field is platform-dependent. The default value for
Cache Size is 896.
This controls whether the ARP component automatically attempts to renew
ARP Entries of type Dynamic when they age out. The default setting is Disable.
Total number of entries in the ARP table.
Configuring ARP
Unified Wired and Wireless Access System
Page 290